How to weigh your caravan and tow vehicle
Estimates are a starting point, but brochures and plates do not include what you carry. A weighbridge visit with the rig loaded for a real trip shows where you stand against every limit. Five readings cover all of them.
Before you go
- Load everything you normally take: food, clothes, tools, bikes, firewood, gas bottles.
- Fill the water tanks if you travel with water, and fill the fuel tank.
- Take your passengers, or note their weights and add them later.
- Have your numbers handy: GVM, GCM, towing capacity, tow ball maximums, towbar rating, ATM and GTM. The glossary explains each one.
- Find a public weighbridge near you: many landfill sites, grain receival points, transport depots and some caravan dealers have one. Mobile weighing services also come to you with portable scales and give per-wheel readings.
The five readings
Vehicle alone, unhitched
Drive the vehicle onto the weighbridge without the caravan, loaded exactly as you will travel, with people on board.
What it tells you: Your loaded vehicle mass before the tow ball load. Compare it with GVM and keep the difference in mind: the tow ball has to fit in it.
Whole rig
Drive on with the caravan hitched so the vehicle and caravan are both on the weighbridge.
What it tells you: Combined mass. Compare it with GCM.
Vehicle only, hitched
Pull forward so only the vehicle is on the weighbridge and the caravan wheels are off it. Take this reading with any weight distribution hitch unhooked. If you use one, take a second reading with it hooked up as you drive.
What it tells you: Hitched vehicle mass. Compare it with GVM. The reading with the hitch unhooked, minus step 1, is your tow ball mass.
Caravan wheels only, hitched
Move so only the caravan wheels are on the weighbridge, still hitched. Weigh with any weight distribution hitch unhooked; if you use one, also weigh with it hooked up.
What it tells you: The load on the caravan axles. Compare the reading taken as you drive with GTM. Step 5 minus the unhooked reading is your tow ball mass.
Caravan alone, unhitched
Unhitch and stand the caravan on its jockey wheel, entirely on the weighbridge.
What it tells you: The caravan's actual loaded mass. Compare it with ATM and with the vehicle's towing capacity and towbar rating. It should be close to step 2 minus step 1.
If the weighbridge can weigh each axle separately, also note the vehicle's front and rear axle loads: the rear axle has its own limit in the owner's manual, and a heavy tow ball load can exceed it even when GVM is fine.
Put the readings to work
Enter readings 1 and 5 and your tow ball mass in the "weighbridge readings" box of the caravan weight checker. It tests every limit at once and shows the tightest one. The tow ball calculator works out the tow ball from readings 1 and 3, or 4 and 5.
If you are over
- Over GVM: move gear from the vehicle into the caravan (if it has ATM room), or drop accessories. A GVM upgrade is possible for some vehicles. It must be approved and certified before you load to the higher figure, approval rules differ by state, and doing it before or after registration can change your GCM and towing capacity.
- Over ATM or GTM: carry less in the caravan, travel with less water, or move heavy items to the vehicle if it has room under GVM.
- Over GCM: the whole rig is too heavy. Something has to come off, or you need a vehicle with a higher GCM.
- Over the tow ball limit: shift weight behind the caravan axles and re-weigh.
This guide describes common practice. Your state's transport authority has the rules that apply to you: see state and territory rules.