RigMass

Tow ball weight calculator

Tow ball mass is the load the caravan puts down on the tow ball. Most people only guess it, but it affects your GVM, your rear axle and how stable the caravan is. Two weighbridge readings are enough to work it out.

Method 1: weigh the caravan

  1. Unhitch the caravan and stand it, on its jockey wheel, entirely on the weighbridge. That reading is its actual loaded mass (its "ATM as loaded").
  2. Hitch it up and put only the caravan's wheels on the weighbridge, with the vehicle off it. If you use a weight distribution hitch, leave it unhooked for this reading. That reading is the load on the caravan axles.

Method 2: weigh the vehicle

  1. Weigh the vehicle on its own, loaded for the trip, not hitched.
  2. Hitch the caravan and weigh only the vehicle again, with the caravan wheels off the weighbridge. If you use a weight distribution hitch, leave it unhooked for this reading.

Then check the result against your vehicle and towbar maximums, and the rest of your limits, in the caravan weight checker.

Without a weighbridge

A dedicated tow ball scale, sold by caravan and 4WD stores, reads the load directly when you lower the coupling onto it. Bathroom scales are not made for this: the load is usually far beyond their range, and lever setups that divide it are easy to get wrong.

What percentage is right?

You will see "about 10%" quoted often, and ranges of 8 to 12% from towing equipment makers. Those are rules of thumb, not legal limits. Your vehicle's and towbar's maximum tow ball mass are the limits that count, and the caravan maker may recommend its own figure. A very light tow ball load is often linked to sway; a heavy one overloads the rear of the vehicle and lightens the steering.

How to change it